Profile The air conditioning heat exchanger test stand is used to test aircraft heat exchangers. It can test primary heat exchangers, secondary heat exchangers, reheaters and condenser on A320, A340, B757 and B737. The main function of air conditioning heat exchanger test stand is to carry out leakage test, pressure Read more
Profile The fuel manifold test bench mainly obtains the flow rate and distribution uniformity of the fuel manifold by measuring the flow rate of each nozzle on the fuel manifold. Structure It consists of the main body of the equipment, the fuel oil supply system, the pressure regulation system, the Read more
Profile The fuel pump test bench system is a multi-model fuel pump maintenance test bench, capable of providing continuous fuel supply with a maximum pressure of 1.5MPa and a maximum flow rate of 200L/MIN. It provides high-temperature, high-pressure and high-flow fuel circulation through the self-circulation mode of the test piece. Read more
Profile The nozzle test bench is mainly used to test the performance of multi-type fuel nozzles under different oil pressures, such as flow rate, angle, distribution, and unevenness. Feature The operator control panel is positioned on an angle at the front of the tester to provide ergonomic operation. The spray Read more
Profile This test bench is designed for running, performance debugging, acceptance and delivery and life assessment experiments of the tested parts. Feature
Introduction The oil pump test bench is mainly used for running-in operation, ground performance, high altitude performance, relief valve test, oil interruption test, pressure circulation test and life test before the product leaves the factory. The lubricating oil pump test bench comprises a main test bench, a lubricating oil supply Read more
Introduction The ISO VG46 hydraulic group is used to provide pressurized ISO VG46 oil for kinds of hydraulic devices, which is mainly composed of high-pressure pump, oil tank, proportional relief valve, safety valve, water cooled heat exchanger, solenoid valve, filter, accumulator, flowmeter, metal particle sensor, check valve, pipe, flange, frame, Read more
Profile Non-rotating hydraulic test stand is designed to perform post-overhaul of hydraulic cylinders, load, control, servo valves, servo actuators and components to acquire and plot flow vs. pressure drop, flow and pressure gains, proof pressure, internal leakage, cracking pressure and general performance characteristics. It is comprised of a main high pressure Read more
Profile It is used for the pressure test of the landing gear actuator, with manual and electric pressure loading functions. Structure It is mainly composed of fuel tank, manual ultra-high pressure system, electric high pressure system, oil return system and mobile bench. Technical Parameter
Profile The rotary hydraulic test section must meet the static and dynamic characteristic test requirements for the mechanical pump, hydraulic motor, electric pump, and power transfer unit (PTU) listed in CMM. The test items should include at least the following: running – in operation, pressure – resistance test, circulation and Read more